OS2.TXT

Notes on upgrading to MS-DOS 6
==============================

If you have OS/2 on your computer, and the MICROSOFT
MS-DOS 6 USER'S GUIDE referred you to the OS2.TXT
file, carry out the following procedure that corresponds
to your computer's configuration. 

If You Have Neither OS/2 Dual Boot Nor OS/2 Boot Manager
--------------------------------------------------------
If you want to remove OS/2 from your computer but want 
to save the data on your hard disk first, carry out the 
following procedure:

To remove OS/2 and save the data on your computer:

1. Restart your computer using OS/2.

2. Back up the data files you want to keep onto floppy 
   disks by using the COPY command.

   CAUTION Do not remove OS/2 system files from your hard disk.

3. Reinsert Setup Disk 1 in drive A (the startup drive).

4. Restart your computer by pressing CTRL+ALT+DEL.

5. When Setup displays the screen about a non-MS-DOS partition
   or non-MS-DOS files, choose to remove the partition or files.

6. After you finish setting up MS-DOS, copy the data files 
   you saved in step 2 from the floppy disks back to your 
   hard disk.

If You Have OS/2 Dual Boot with DOS or OS/2 Boot Manager
with DOS
--------------------------------------------------------
